Showing posts with label 1 hr. Show all posts
Showing posts with label 1 hr. Show all posts

21 September 2019

Dress to Jumpsuit

Time to Complete: 1 h
Sewing Machine Required? Yes
Difficulty: Difficult

I've been refashioning all summer, but haven't gotten around to posting my creations!


On a sunny day back in May, I decided it was time I joined the jumpsuit frenzy currently washing through the fashion industry. Fortunately I had just the piece:


Sort of...
Obviously, this is a dress, not a jumpsuit. One could theoretically do a handstand in a jumpsuit with no undergarment-related disasters. I cannot do a handstand in a jumpsuit or out, but it doesn't change the fact that this is most definitely a dress. 

But this dress did fit me nicely up top, and since I knew creating legs out of that voluminous skirt would be a big job, I didn't want to have to alter it anywhere else, too.

I'd never done a jumpsuit refashion before, I started off by very awkwardly gathering the fabric between my legs where I imagined a crotch seam ought to exist, and pinning it with a safety(!!) pin.


I don't do this for the dignity.
Then I took the dress off, lay it on the floor, and drew a rough arch to create legs. I intentionally drew it a little lower than my pin mark, because I really didn't want to take off too much. 


Seeing the vision, fingers crossed.
Then I cut!

Past the point of no return!
I turned the whole thing inside-out and stitched up that raw edge. I knew I would probably have to make more adjustments, but I wanted to see what that would accomplish. The result? MC Hammer would have been envious. 


Like I said: not in it for the dignity.
To clarify, this is a picture of me trying to figure out how to get rid of the diaper-like bulk I'd managed to create. Hey, it was my first time doing this type of refashion, there were bound to be a few hiccups!Anyway, after cutting and re-sewing the inseam a couple of times, I had a fit I liked. They were still loose, but that was my original intention. I paired my new jumpsuit with an oversize pendant necklace.


Ta-dah!
Given the embarrassing sequence in the middle of this refashion, I was relieved to pull it off. I was never a huge fan of the jumpsuit craze, and I still don't know if this will ever become one of my favourite pieces, but it was a fun challenge! 

Criticisms: I learned one obvious lesson while making this piece, which is that my butt actually takes up space--which means I need to take in more of the front of the skirt and less of the back. This makes for an unequal raw edge, which is why I had such difficulty getting a good fit. If I were to do this again, I'd spend a lot more time pinning it to make sure I got it right the first time!



15 June 2019

Sunny Jumper

Time to Complete: 1 hour
Sewing Machine Required? Yes
Difficulty: Difficult

We've been getting some gorgeous weather, so I decided to celebrate with this sunny number:

Look closer...
Witchy sun-moon-face!
I bought this very 90s dress purely for the gold-embroidered emblem on the front. I did an MA on medieval magical practices (not witchcraft, and don't get me started on how they're different!), so the subtle occult detail tugged at my heart. 

I've been seeing a lot of jumpers around recently, like this cute one from Modcloth:


So I decided to make one for myself. First, I was going to have to get rid of those sleeves:

Goodbye!
I don't often take sleeves off entirely, because it's tricky to hem the armholes again. Often they'll end up huge and gaping, which just doesn't work for most dresses. For a jumper, however, an extra-large armhole is ideal!

Real armholes have curves, so I made sure to snip about 1/2cm in every 10cm or so along the raw edge.

Like so...
This provides some give for double-folding the hem, so it doesn't get clumpy and awkward. I stitched around to close up the raw edges.

Next, I needed to take it in a bit. I still wanted it to have a relaxed fit, so I sewed a straight line down each side.

Marked and ready for stitchery!
Once I'd taken in the sides, it was just a matter of adjusting the length. I forgot to take pictures, but just see any of my other posts for tips on shortening a dress.

The end result? 

I so need to find a better backdrop!
Paired with a yellow T-shirt to bring out the gold, I think this baby-doll style jumper feels like a nice mix of youthful and grown-up.

Criticisms: Actually, this one turned out pretty much the way I envisioned it! I can't think of anything I'd change. I love it when a plan comes together!


28 February 2019

A New Old Dress

Time to Complete: 1 hour
Sewing Machine Required? Yes
Difficulty: Difficult

I've had this dress since before my refashioning days, and it has always been one of my favourites. 


Unfortunately, it's getting old and tired, and it doesn't fit me nearly as well in my twenties as it did in my teens! Enter this massive piece:
Ok, so it doesn't look like much...yet
Not only is the print almost identical to my old favourite, the fabric is also the same cozy stretch knit! I knew at once that I was going to turn this too-big piece into a new version of my beloved but worn-out dress. To get there, I was going to have to make it much smaller. 

I started by putting it back on inside-out and measuring in from the sides how far I wanted to take it in.

I have a full handful of fabric on either side.
I marked the two narrowest points with safety pins, then took the dress off and lay it out on the floor. I knew I would probably have to take it in in several stages, so I wasn't concerned about getting it right all at once.


I drew the new shape of the dress onto the fabric with a charcoal pencil...


...stitched along the lines...


And tried it on again. There was still a lot of fabric bulk inside, since I hadn't trimmed the excess yet, but I wanted to make sure I was on the right track. I was! I just needed to take it in more under the arms.


I trimmed off the excess...


...drew a new line to take the sleeves and underarms in and stitched it down...


Then trimmed again. I tried the dress on again.


So far, so good, but the neck was too wide.


This photo gives an idea of where I stitched, but I redrew the line after taking the picture and forgot to take another. Just imagine the line curving better to follow the line of the shoulder.

The final step was to take a little bit of length off the bottom.

Nice slippers...
I hemmed the raw edge and did a quick press of all the new seams even though it didn't seem to need it much. Here's the end result:


Aside from the long sleeves, it's my old favourite reborn!

Criticisms: I shouldn't have cut the excess out of the underarms before adjusting the neck, since narrowing the collar also changed the fit of the sleeves a bit. Now it's just the tiniest bit too tight and I can't readjust because I cut out the extra fabric. Oh well, lesson learned!





9 February 2019

Banana Cream Pie Dress

Time to Complete: 1 hour
Sewing Machine Required? Yes
Difficulty: Difficult

Let's take a look at today's contender, shall we?


I look like a 19th century school marm.
This dress has been sitting in my refashion closet for nearly a year, waiting for me to find just the right mood in which to tackle it. Today was the day. It doesn't look very impressive in this picture, but let's look a little closer at that collar detailing.


Pretty!
The scrollwork on that lace netting won my heart when I encountered this piece, and it is still my favourite part of the dress. To make it really shine, I knew I needed to downplay the rest of this banana-hued beast.

There followed a flurry of chopping.


Bye-bye, monster shoulder pads!
It's bigger than my face!
So long, useless side-tie thingies!
Handy hook-and-eye closure, you can stay.
With those unnecessary bits removed, it was time to make a big decision: how much of the skirt to cut off? I decided to chop around the fifth button down from the waist.

I've made a few crooked hems recently, and I decided it was time to tidy up my act and do something properly, for once, rather than my usual cut-and-pray method. I laid the dress out on the floor and measured down from the waist, marking around the skirt with a charcoal pencil.

Use charcoal for pale fabrics and a bar of hand soap for dark fabrics!
Then I unbuttoned the skirt and cut along my charcoal line.

Chomp!
The next step was to fold, pin, and iron my new hem. I took my time to avoid wrinkles and keep the line even.

Lots o' pins!
Then I stitched down my new hem. 

I wasn't finished yet, though. The length of the skirt was fixed, and the shoulder pads were gone, but the sleeves of this dress were still massive and made me look very top-heavy. I needed to take them in. 

Out with the pencil!
I marked the line I wanted to sew (a rough guess based on putting the dress on and pinching in the fabric under the armpits) on both sides. Then I stitched it down. I tried it on to make sure the fit was good, then cut away the excess material with my pinking shears.

Toothy cuts!
Finally, this dress was complete! 

Cute!
Not to brag, but that hemline is dead even. It really makes a difference when I take the time to get it right! I wore this dessert-inspired dress with some navy tights, my favourite braided belt, and a pendant necklace. What do you think?

Criticisms: The skirt ended up being a touch shorter than I like. I was hoping for something I could wear to work, and this is shorter than I'd be comfortable with. I did look through my scrap bin for something I could use to extend the length of the skirt, perhaps in a coordinating colour, but I didn't have anything I liked. Looks like this is destined to be a date nights and days out dress!



27 September 2017

Mom's Maker Makeover Dress

Hello again! I won't bore you with the details of my long absence - suffice to say that we moved out of our apartment into a house, and it was a lot of work but well worth it! If you keep a close eye on the backgrounds in the pictures, you'll be able to see my new floors.

Anyhow, I have an exciting and much belated announcement! Refashion Without Rules will be making its first public appearance at the Prince George Mini Maker Faire on Saturday, September 30th! I am both excited and nervous to showcase my projects in person, and I hope to see you there!

My mom has agreed to help me person my booth, so the least I could do was manage a refashion for her! Obviously, I only want to give my mom the best, so I gave her this lovely kaftan.

She looks awfully happy to be wearing that...
This photo was taken at a family dinner at my grandparents', and the family were justifiably dubious when they first saw this frock. There is a lot of dress there, and it is very very bright--the picture doesn't do justice to just how tomato-y the red of this dress is. But the bottom border is gorgeous and the fabric is comfortable. This dress just needs to be a lot less, so that is what I planned to do.

The first thing I did was cut out the middle section, because I wanted to keep that lovely border and lose some of the red. There was a zipper down the back, but I cut right through it (making sure it was done up, of course).

Losing over a foot of length and a lot of red!
Then I also trimmed the sleeves to lose some more of the redness, at my mom's request.

Trim one sleeve...
...and use the cut section to measure the other sleeve.
Then I had to put this dress back together, sans center. The rule of thumb whenever joining two pieces of a garment is to make sure the right sides (the patterned or finished sides) are together--but simple as that sounds it always takes me a few pinning attempts to make sure I don't put something together half backwards.

Right sides together? Check.
I matched up the side and back seams and pinned them.

Seams properly pinned.
I pinned around the rest of the edge. Since the bottom piece from the skirt was wider than the top, I added two pleats in both the front and back to collect the excess fabric.

A pinned pleat.
Then I sewed them together! I went right over the zipper. Most sewing machines won't have a problem with a small zipper like this one.

It did make a cha-chunk sound, though...
With the top and bottom of the dress reunited, I noticed a slight problem. The original dress had a slit up the side, but with the shortened torso, that slit had migrated to an uncomfortable height. I unpicked the hem around the slit.

Picky pick...
Then I sewed the two sides of the slit together to match up with the existing seam.

Just follow the line...
Lastly, I dealt with the sleeves, and I apologize because I didn't take any pictures of that step! I did end up trimming a bit more off the sleeves to round them off, and then I simply hemmed the raw edge.

Here's the finished product!

Looking good, Mom!

 She'll be wearing this at the Maker Faire, and I'll be (hopefully) wearing an all-new creation there too! Come by for a live preview of my next post!